Student wonders how oil can be used in transformers
MIDWEST had a curious question from an engineering student about large oil filled electrical power transformers. He couldn’t understand why a 20 Mva power transformer filled with oil didn’t burn when it had electricity actually flowing through it. It was his gut instinct that electricity and any flammable liquid didn’t mix and would result in an immediate explosion or fire. Just made sense to him. He associated electricity with sparks and arcs. In our world, his question seemed ridiculous because we work around 2000 kva, 10,000 kva and 30 Mva oil filled power transformers all the time and it never occurs to us that electricity and oil don’t mix. Actually a quick load check on oil filled transformers is to put your hand on the side of the tank and see how hot it is. Yup, first we check to be sure the transformer is grounded. But we don’t worry about an explosion or fire if the tank is so hot you can’t keep your hand on it. We do worry about other things when a transformer is that hot, but not fire and explosion. Oil has been used for decades in oil switches and oil circuit breakers along with large oil filled power transformers. It’s the coolant and was used to quench the arc when the oil circuit breaker opened to interrupt the circuit. This student saw a video on the internet of a large high voltage oil filled transformer exploding and couldn’t believe there was actually oil in it. We explained oil flash point and fire point. Discussed the need for a source of ignition and that, under normal conditions, there would be no arcing in a transformer. Talked about oil not getting anywhere near hot enough to vaporize into an ignitable mixture with air, oxygen. But he had fixed in his mind that electricity and oil do not mix. We guessed he needed an opportunity to work on an old outdoor 10,000 Kva oil filled power transformer in the middle of Winter. That would probably cure his misconception.